HNP073 interchange of PALL oil purifier cart
Release date:2012-11-06 Author:LEFILTER
Brief introduction
HNP series oil purifier is desined to filtering oil by remove water,air and dirty. Oil oxidation,Lubrication performance loss and aeration influence directly on reliability
of system and service life of system component and oil.
The Pall HNP fluid conditioning purifier removes 100% of free water and as much as 80% of dissolved water. It also removes 100% of free and entrained gases and
up to 80% of dissolved gases. Particulate removal is achieved using a high beta rated Ultipor® III filter element to polish the fluid before discharge back to the system
reservoir.Other replacement filter media grades are also available to suit application requirements.
The
HNP can be moved from one system to another or left as a permanent installation. The HNP purifier is simply connected to an electric supply, the inlet valve
opened and “reset” and “start” buttons pressed to start the fluid purifying process.
Automatic controls, integral to the unit, constantly monitor the operation and will safely shut down the system if fluid levels and pressures are outside normal limits.
Safety features include high and low level float level switches, discharge relief valve (set at 100 psid/7 bar), inlet oil vacuum pressure switch and drip tray float switch.
The
HNP fluid conditioning purifier has been designed to be robust and reliable under the most arduous of conditions. All components are easy to maintain and filter
elements are readily accessible for change out.
Purifier model type:HNP *1 *2 *3 *4 *5 *6 *7
Filter element type:Inlet:*11
Outlet:*8 *10 *9 *4
Air filter model type:
HH3050C12RF40V only used for HNP006
HC293SEE5 used for HNP021/HNP073/HNP200
*1:
No. |
Flow rate(L/min) |
006 |
10 |
021 |
20 |
073 |
70 |
200 |
229 |
*2:
No. |
Voltage |
M |
220V 1PH |
R |
380V 1PH |
T |
415V 3PH |
*3:
No. |
Frequency(Hz) |
3 |
50Hz 3PH |
4 |
60Hz 3PH |
5 |
50Hz 1PH |
*4:
No. |
Sealing material |
Media |
H |
NBR |
Petroleum base |
Z |
VITON |
Special synthetic liquid |
*5:
No. |
Installation type |
C |
Movable type |
S |
Fixed type |
*6:
No. |
Connection type |
P |
Pipe thread |
T |
Taper thread |
Note:it is not applied to the HNP073 with heater
*7:
NO. |
Meaning |
Model type |
YCH02 |
With heater |
Only used for HNP073 |
X109 |
Domestic market |
Only used for HNP021 |
*8:
NO. |
Model type |
UE219 |
Only used for HNP006 |
HC9100 |
Only used for HNP0021 |
UE619 |
Only used for HNP073(200) |
*9:
NO. |
Filter element length |
8 |
8 |
20 |
20 |
40 |
40 |
*10:
NO. |
Filter element |
Applied model |
AZ |
AZ(ß2.5 ≥1000) |
HNP006(073,200) |
AP |
AP(ß5 ≥1000) |
HNP006(073,200) |
AN |
AN(ß7 ≥1000) |
HNP006(073,200) |
AS |
AS(ß12. ≥1000) |
HNP006(073,200) |
AT |
AT(ß22. ≥1000) |
HNP006(073,200) |
FKZ |
KZ(ß2.5 ≥1000) |
HNP021 |
FKP |
KP(ß5 ≥1000) |
HNP021 |
FKT |
KT(ß12. ≥1000) |
HNP021 |
EOS |
OS(105um) |
HNP021 |
*11:
NO. |
Imported filter element |
Quantity |
HNP021 |
HM55420 |
1 |
HNP072 |
HCA082EOS8Z |
1 |
HNP200 |
HC8300EOS9Z |
3 |